POLYTECH® THERM is an insulating plaster premixed in bags, composed by cement, hydraulic lime, POLYTECH® THERM RESIN (compound of additives designed for plaster) and polystyrene beads treated with TECH additive.
This formulation allows an excellent adhesion to the surface, plasticity of the mortar and waterproof plaster after curing. Moreover, an immediate saving on heating costs.

All you need to do is just add water, since every component of the compound is already into the bag and a normal mixer or plaster machines.

Advantages:
Allows big cost savings compared to traditional insulation methods
Water repellent
It does not cause cracks
Eliminate thermal bridges
Ensures good thermal insulation and good sound absorption
Allows a considerable energy saving

Technical characteristics:
Thermal conductivity: 0,056 W/mk.
Compliant with UNI EN 998-1 (T-CS1-W1).
Resistance to vapor diffusion (EN 1015-19) 4,5.
Fire classification M0 (non-flammable).

Fields of use:
Thermal insulation coatings, thermal insulation of internal walls, thermal insulation on the ceiling, elimination of thermal bridges of buildings and in general, protection of facades from rainwater.

Necessary for the production of POLYTECH® THERM:

• Bagging machine BMP
• CD1
• TECH additive
• POLYTECH® THERM RESIN
• Cement
• Hydraulic lime
• Polystyrene beads

L'articolo POLYTECH® THERM proviene da Coisoimper.

POLYTECH® MP  is an insulating concrete premixed in bags composed by cement and polystyrene beads treated with TECH additive. It is suitable for the production of insulating lihtweight concrete, with a particularly low specific weight and low thermal conductivity.
All you need to do is just add water, since every component of the compound is already into the bag.
The product can be used for light screeds, slopes and wherever low weight, together with good compressive strength, is required, providing thermal and acoustical insulation.

POLYTECH® MP can be mixed with normal mixers, it not require specific machines.

Advantages:
Fire classification M0 (non-flammable).
Buona resistenza a compressione.
Breathability to water vapor.
High thermal insulation
Excellent workability.
Not require specific machinery.

Necessary for the production of POLYTECH® MP:

• Bagging machine BMP
• CD1
• TECH additive
• Cement
• Polystyrene beads

L'articolo POLYTECH® MP proviene da Coisoimper.

POLYTECH® bag is a bag with polystyrene beads homogeneously treated with TECH additive.
It is packaged in the factory using CD1 system which nebulizes the polystyrene beads with TECH additive and fill the bags. (normally bags of 250 lt and 500 lt).
POLYTECH® bag with the adding of water and cement, is used for the production of POLYTECH® and it is mixed by specific machines as Mp1 or KOMPATTO Series or with normal mixers.

TECH additive is a liquid solution of anionic surface-active agents with neutral PH and it is omogenously mixed with polystyrene beads, ensuring an accurate mixing of the concrete with the polystyrene (EPS) avoiding the separation and sedimentation.
Moreover, it also increases the mixture volume, avoid the problems of shrinking and related consequences as: cracks and deformations, without modifying curing times of concrete mixture.

Advantages:
Fire classification M0 (non-flammable).
Buona resistenza a compressione.
Breathability to water vapor.
High thermal insulation
Excellent workability.
Not require specific machinery.

Necessary for the production of POLYTECH® bag:

• CD1
• TECH additive
• Polystyrene beads

L'articolo POLYTECH® bag proviene da Coisoimper.

The foaming agents series is composed by:
– TECHCELL: liquid foaming agent for the production of FOAM CONCRETE CLC screed and filling.
– TECHCELL HT: liquid foaming agent for the production of CLC SLABS HP, CLC WALLS, CLC BLOCKS and CLC PANELS.
– TECHCELL S: concentrated powder to produce the liquid foaming agent TECHCELL.

TECHCELL
Liquid foaming agent for the production of FOAM CONCRETE, CLC screed and filling.

TECHCELL is foaming agent surfactant, 100% natural, no organic.
Specifically used for the production of CLC screed and filling.

Technical characteristics:
Facilitates the implementation of CLC
Generates stable density foam
Good thermal insulation
Produces CLC with a nominal dry density of between 300 and 1600 kg/m³

Packaging:
1.000 Kg tank, 220 Kg drum, 20 Kg drum.
Standard dosage:
From 0,3 Kg/m³ to 1,4 Kg/m³. (It depends on the Dry Density produced).

TECHCELL HT
Liquid foaming agent for the production of FOAM CONCRETE, CLC SLABS HP, WALLS, BLOCKS and PANELS.

TECHCELL HT is foaming agent surfactant, 100% natural, no organic.
Specifically used for the production of CLC SLABS HP, WALLS, BLOCKS and PANELS.

Technical characteristics:
Speeds up the drying phase
Facilitates the implementation of CLC
Generates stable density foam
Good thermal insulation
Produces CLC with a nominal dry density of between 300 and 1600 kg/m³

Packaging:
1.000 Kg tank, 220 Kg drum, 20 Kg drum.
Standard dosage:
From 0,6 Kg/m³ to 1,1 Kg/m³. (It depends on the Dry Density produced).

TECHCELL S
Concentrated additive in powder to be diluted in water and produce the foaming agent liquid TECHCELL. Designed to save transport costs and storage spaces.

Advantages:
–  Reduced transport costs
–  Reduced storage space requirements
Standard dosage:
0,1 Kg/lt, (100 kg of powder to produce 1000 lt of TECHCELL).
Preparation:
– Introduce water into a bucket or mixer and add TECHCELL S
– Mix with the drill for few minutes, until the powder is totally dissolved
– Wait for a few minutes before using the foaming agent.
Packaging:
– 10 kg bucket (Equivalent to 100 lt of TECHCELL liquid).
– 70 buckets/pallet of cm 120x100x175 h = 700 kg  equivalent to 7.000 kg of liquid.
Standard dosage (liquid):
From 0,45 lt/m³ to 2,1 Kg/m³. (It depends on the Dry Density produced).

Shelf life for TECHCELL and TECHCELL HT:
12 months
Shelf life for TECHCELL S:
18 months
Safety: 
TECHCELL, TECHCELL HT and TECHCELL S are not dangerous. The safety data sheet is available upon request.
Information about transport:
Road and railway (ADR/RID), Air (CAO/IATA), Sea (MDG/MO): Not dangerous.

L'articolo Foaming agents for CLC proviene da Coisoimper.

The additives for POLYTECH® series is composed by:
– TECH: liquid additive with dosage 1 Kg/m³
– TECH S: concentrated powder additive with dosage 80 gr/m³
– TECHPOL: liquid additive to produce POLYTECH® bag

TECH
Liquid additive for the production of POLYTECH®, the lightweight concrete with polystyrene.

TECH additive is a liquid solution of anionic surface-active agents with neutral PH, to make POLYTECH®, the lightweight concrete with polystyrene beads, for high thermal and acoustic insulating power.
TECH additive, ensure an accurate mixing of the concrete with the polystyrene (EPS) avoiding the separation and sedimentation.

Moreover, it also increases the mixture volume, avoid the problems of shrinking and related consequences as: cracks and deformations, without modifying curing times of concrete mixture.

Packaging: 1.000 kg tanks, 200 kg Drums, 20 kg cans.
Dosage: 1 kg/m³

TECH S
Concentrated powder additive for the production of POLYTECH®.

TECH S is a concentrated powder to make POLYTECH®, the lightweight concrete with polystyrene beads, for high thermal and acoustic insulating power.
TECH S ensure an accurate mixing of the concrete with the polystyrene (EPS) avoiding the separation and sedimentation.
Moreover, it also increases the mixture volume, avoid the problems of shrinking and related consequences as: cracks and deformations, without modifying curing times of concrete mixture.

The powder does not require a pre-processing, is added directly into the mixer after the water.

Packaging: 10 kg bucket. (Maximum quantity in a pallet cm 120x100x175 h: 70 buckets = 700 kg = 8.750 m³).
Dosage: 80 gr/m³.

TECHPOL
Liquid additive for the production of POLYTECH® bag, the polystyrene bag with additive.

TECHPOL is a liquid additive for the production of POLYTECH® bag. 
TECHPOL ensure an accurate mixing of the concrete with the polystyrene (EPS) avoiding the separation and sedimentation.
Moreover, increases the mixture volume, avoid the problems of shrinking and related consequences as: cracks and deformations, without modifying curing times of concrete mixture.

Packaging: 1.000 kg tanks, 200 kg Drums, 20 kg cans.
Dosage: 1 kg/m³

Shelf life for TECH and TECHPOL:
12 months
Shelf life for TECH S:
18 months
Safety:
TECH, TECH S and TECHPOL are not dangerous. The safety data sheet is available upon request.
Information about transport:
Road and railway (ADR/RID), Air (CAO/IATA), Sea (MDG/MO): not dangerous.

L'articolo Additives for POLYTECH® proviene da Coisoimper.

The series is composed by:
– DSP XL: powder to increase the compressive strength and decrease the drying times.
– FBR: used to increase the flexural strength and tear resistance, moreover prevent surface cracks and shrinkage.
– HDR: powder to decrease the drying times.
– DSP XM: powder for self leveling screed CLC HD and TECHLIVEL.
– DSP XML: liquid additive for self leveling screed CLC HD and TECHLIVEL.
– DSP AG: powder that retains water, used for slopes in FOAM CONCRETE .
– COISO HP: compound for the production of CLC SLABS HP.

DSP XL
Powder to increase the compressive strength and decrease the drying times.

DSP XL does not require a pre-processing, is added directly into the mixer during cement loading.
Used for the production of CLC & POLYTECH® walls, panels and blocks.
Advantages using DSP XL:
– Increasing of compressive strength
– Decreasing of drying times
– Prevention surface cracks and shrinkage

FBR
Used to increase the flexural strength and tear resistance, moreover prevent surface cracks and shrinkage.

Advantages using FBR:
– Increasing of flexural strength and tear resistance
– Increasing of resistance to hydrostatic pressure
– Prevention surface cracks and shrinkage

HDR
Additive in powder to decrease the drying times.

HDR is a concentrated additive in powder, to be diluted in water.
Used for the production of CLC & POLYTECH® walls, panels and blocks.
Advantages using HDR:
– Reduced cement setting times
– Increasing of compressive strength
– Reduced drying times

DSP XM
Additive in powder for self leveling screed CLC HD and TECHLIVEL.

DSP XM allows to produce the fluid self leveling screed CLC HD and TECHLIVEL, giving and high compressive strenght to glue directly the tiles on top the lightweight concrete screed.
Advantages using DSP XM:
– Increasing of fluidity making the screed self leveling
– Makes easier the leveling of the material and the pumping even with high density
– Increasing of compressive strenght
– Reducing of drying times
– Prevention surface cracks and shrinkage

DSP XML
Liquid additive for self leveling screed CLC HD and TECHLIVEL

DSP XML allows to produce the fluid self leveling screed CLC HD and TECHLIVEL, giving and high compressive strength to glue directly the tiles on top the lightweight concrete screed.
Advantages using DSP XML:
– Increasing of fluidity making the screed self leveling
– Makes easier the leveling of the material and the pumping even with high density
– Increasing of compressive strenght
– Reducing of drying times
– Prevention surface cracks and shrinkage

DSP AG
Powder that retains water, used for slopes in CLC.

Powder additive that retains water and reduces the rheological properties of the CLC, allowing the production of slopes also in CLC.
Advantages using DSP AG:
– Decreased fluidity of the CLC
– Retains water, reducing dripping
– Possibility of throwing on wooden attics

COISO HP
Compound for the production of CLC SLABS HP.

Using COISO HP, the slabs have the following characteristics:
– High compressive strength
– Resistance to impact
– Flexural strength (during the filling of CLC between the two slabs)
– Tear resistance (for fixing wall units)
– Fire resistance and protection to steel frame
– Lightness and good thermal insulation

L'articolo Auxiliary additives for CLC & POLYTECH® proviene da Coisoimper.