Skip to main content

Foam Generators for plastering machines

Foam generators to be combined with plastering machines or similar, for the continuous production of CLC.

Foam Generators for the continuous production of CLC, the cellular light concrete.
The foam generators GSI was designed to work simultaneously with plastering machine or similar machines that produces slurry.
Thanks to the MiV system is possible to obtain up to 15 m³/hr of continuous production.

The vertical mixer MiV allows the continuous production and increase the capacity.
Moreover,  if is required the vertical pumping, can be placed on the casting floor, eliminating the CLC volume decreasing due from the back pressure into the hoses that crushes the air bubbles.

The series presents 3 versions, designed for every type of requirements with different automation, production capacity and fittings.

  • GSI & MiV, version for the production up to 18 m³/hr. Automatic plant, with electric panel that controls plastering machine and cement silo. Can be used also without silo.
  • GSI xpm, version for the production up to 10 m³/hr. Semi automatic plant with connection to external machine for a simultaneus starting.
  • GSI LC, basic version for the production up to 7 m³/hr.

GSI & MiV

GSI & MiV is the most complete and automatic version of the series and can be connected to the cement silo for autonomous production.
The plastering machine is connected to the cement silo for an automatic and autonomous work, without any workers.
In case of lack of water or cement, the plant is blocked from the sensors controlled by the PLC of the GSI & MiV electric panel.
Moreover, GSI & MiV, controls the plastering machines and the silo vibrators.

GSI & MiV can be also used without cement silo, loading manually the cement bags.

GSI & MiV is composed by: electric panel with PLC, air compressor with tank, foam pump, water pump with flow meter for slurry production, flowmeter and air pressure regulator for foam adjustment, nozzle for foam production, vertical mixer MiV, connections for cement silo and plastering machine.

Using a plastering machine with rotor/stator 80 lt/min, is possible to produce up to 18 m³/hr and approx 100 mt of pumping horizontally and 60 mt vertically.

GSI xpm

GSI xpm is the semi automatic version of the series.

GSI xpm is used without cement silo, the plastering machine is manually fed by the operator with cement bags.
It is composed by: electric panel, air compressor with tank, foam pump, flowmeter and air pressure regulator for foam adjustment, nozzle for foam production, vertical mixer MiV, connections for external plastering machine.

Using a plastering machine with rotor/stator 60 lt/min, is possible to produce up to 10 m³/hr and approx 80 mt of pumping horizontally and 30 mt vertically.

GSI xpm can be used with any kind of monoscrew pumps that produce up to 60 lt/min of slurry.

GSI LC

GSI LC is the basic version of the series.
It can be used with any kind of monoscrew pumps that produce up to 30 lt/min of slurry.

GSI LC is composed by: electric panel, air compressor with tank, foam pump, flowmeter and air pressure regulator for foam adjustment, nozzle for foam production, vertical mixer MiV, connections for external plastering machine.

Using a plastering machine with rotor/stator 30 lt/min, is possible to produce up to 7 m³/hr and approx 60 mt of pumping horizontally and 20 mt vertically.

Request info

Please enable JavaScript in your browser to complete this form.
Privacy policy

CO.ISO.IMPER S.R.L. - Via Cassia, 52047 Marciano della Chiana (AR) - P.IVA 01275220513 - REA AR-94793 - Cap. Soc. 20.000,00 €
Copyright © 2024 | All rights reserved